From Rs. 500.00

tap repair camad repair blacking

Rs. 500.00 / Hour

Tap repair and maintenance, tap and leakage check and inspect.

Rs. 650.00 / Hour

Commode repair involves fixing leaks, cracks, or malfunctioning flush mechanisms. Blockage includes clearing clogged pipes or drains to restore proper flow and prevent backups.

Rs. 1,000.00 / Unit

Solar panel servicing involves inspecting, cleaning, and maintaining the panels and tubes to ensure optimal performance. Technicians check for damage, debris, or dirt that could reduce efficiency. They clean surfaces using non-abrasive methods to avoid damage. Regular maintenance includes checking electrical connections, wiring, and the system's overall functionality. Proper servicing enhances the longevity and energy output of solar systems.

From Rs. 200.00

Installed a new filtration system on the vessel, including mounting, piping, and integration. I also performed testing, ensured proper operation, and provided training and documentation.

Rs. 650.00 / Hour

Applying a blend of plaster or cement to surfaces creates a smooth, durable finish. This ensures proper adhesion and provides an even base for painting or further treatments.

Rs. 1,000.00 / Unit

1. Visually check panels for damage, wear, or dirt accumulation. Assess overall system performance (output vs. expected). 2. Remove dirt, debris, and dust from the panels using non-abrasive methods to ensure maximum efficiency. 3. Test the inverter, wiring, and connections for any faults or irregularities in voltage and current. 4. Inspect and clean other system components like the inverter, battery (if applicable), and charge controllers. 5. Replace any damaged panels, wiring, or components. Repair any issues found during the electrical check. 6. After servicing, perform a final check to confirm that the system is working at optimal performance levels. 7. Provide the system owner with a detailed service report and recommend future maintenance or upgrades.

From Rs. 200.00

Installation: 1. Position and connect the filter vessel to the inlet/outlet pipes and drain line. 2. Attach control/bypass valves, secure connections with plumber’s tape, and test for leaks and proper filtration. Repairing: 1. Shut off the water supply and diagnose issues (leaks, clogs, valve malfunctions). 2. Replace or repair faulty parts, reassemble, and test the system for functional

Rs. 200.00 / Unit

Solar repair involves diagnosing and fixing issues with solar panels or tubes, such as faulty wiring, damaged cells, or system malfunction. The service ensures optimal performance and energy efficiency by restoring functionality.

Rs. 500.00 / Hour

New bathroom fitting pipeline work involves installing water supply and drainage pipes, ensuring proper alignment and connection to fixtures like sinks, showers, and toilets. This includes securing pipes, testing for leaks, and ensuring optimal water flow and drainage.

Rs. 500.00 / Hour

Commode spray replacement and repair involves fixing or replacing malfunctioning sprays for proper water flow. Technicians ensure the spray is securely installed and fully functional for effective use.

Rs. 500.00 / Hour

Waste pipe leakage servicing involves locating and repairing leaks in the waste pipe system. Technicians seal or replace damaged sections to prevent water damage and ensure proper drainage.

Rs. 650.00 / Hour

Kitchen sink blockage servicing includes diagnosing and clearing clogs in the drain pipes caused by grease, food particles, or debris. Technicians use tools such as plungers or augers to remove the obstruction. They ensure proper water flow and check for potential issues in the plumbing.

Rs. 650.00 / Hour

Wash basin blockage servicing includes identifying and clearing blockages in the drainpipe. Technicians use tools to remove debris or buildup, restoring proper drainage and preventing future clogs.

Rs. 650.00 / Hour

Urinal blockage servicing involves diagnosing and clearing clogged pipes to restore proper flow. Technicians use specialized tools to remove debris, buildup, or obstructions. The process ensures smooth operation and prevents future blockages.

Rs. 500.00 / Hour

Urinal push valve replacement involves removing the faulty valve and installing a new one to ensure proper water flow.

From Rs. 200.00

Mangal dhal blockage servicing involves clearing blockages in the Mangal dhal system, typically caused by debris or buildup. Technicians use specialized tools to restore proper flow and prevent further clogs.

Rs. 650.00 / Hour

- Ensure that the water supply to the tank is turned off - Drain all the water from the tank. If it’s a large water tank, use pumps or gravity-based drainage. For smaller tanks, you may use buckets or siphons to remove the water. - After draining the water, manually remove any visible debris, dirt, or sludge that may have settled at the bottom of the tank. - Using a long-handled brush or scrapers, gently scrub the interior surfaces - Depending on the tank’s condition and the level of contamination, apply a cleaning solution - Using brushes or scrubbing pads, scrub all the tank's interior surfaces. Start from the top and work your way down to the bottom. Pay attention to the corners, seams, and edges where residue may accumulate. - Once the tank is clean, sanitize it to eliminate any remaining bacteria or pathogens. - Allow the tank to air dry completely - Inspect the tank for any structural damage, cracks, or leaks. Ensure that the inlet and outlet pipes are clean and functioning well. - Once everything is clean and inspected, refill the tank with fresh, potable water. If necessary, check the water for clarity and odor to confirm that it is free from contaminants.

Rs. 1,300.00

Wash basin installation involves securing the basin to the wall or countertop, connecting the water supply and drain pipes, and ensuring proper alignment and sealing to prevent leaks. It also includes testing for functionality and water flow.

Rs. 500.00 / Hour

The shower head installation involves mounting the showerhead to the wall pipe, securing it with appropriate fittings, and ensuring proper alignment for water flow. The work includes checking for leaks and adjusting the pressure for optimal performance.

Rs. 500.00 / Hour

1. Remove the old seat- unscrew the bolts securing the old seat to the commode. 2. Clean the toilet bowl surface where the new seat will be attached. 3. Place the new seat on the commode and align the holes. 4. Tighten the bolts to securely attach the new seat. 5. Ensure the seat is stable and adjusts properly.

Rs. 500.00 / Hour

1. Shut off the water supply / gather tools, and remove the old fittings. 2. Install New Fittings like faucet, showerhead, and bathtub spout. 3. Install drain assembly and overflow drain (for bathtubs), ensuring tight, leak-proof connections. 4. Turn on the water, inspect for leaks, and ensure all fittings work (water flow, temperature control, etc). 5. Install decorative covers, clean the area, and Double-check all connections and ensure proper functioning.

Rs. 1,250.00

1. Select a dry, well-ventilated area near the water supply and electrical outlet. 2. Secure the geyser on the wall using proper brackets. 3. Connect the inlet and outlet pipes to the geyser. 4. Connect the geyser to the electrical supply, ensuring proper grounding and safety precautions. 5. Check all water connections for leaks. 6. Turn on the power and water supply, ensuring the geyser heats up properly.

Rs. 900.00

1. Select a well-ventilated area, typically near a gas line and water supply. 2. Secure the gas geyser on the wall using appropriate brackets. 3. Attach the gas inlet pipe to the geyser using proper fittings. 4. Connect the inlet and outlet water pipes to the geyser. 5. If required, connect the ignition system or thermostat. 6. Check the gas and water connections for leaks. 7. Turn on the gas and water supply to ensure the geyser heats properly.

Rs. 650.00 / Hour

1. Inspect the commode for cracks or loose connections. 2. Turn off the water to the toilet to prevent further leakage. 3. Detach the tank from the toilet bowl if needed. 4. Replace worn-out seals, bolts, or the flush valve. 5. Reassemble the commode, ensuring all connections are secure, and test for leaks.

Rs. 1,500.00

1. Ensure the floor is level and clean. Mark the position of the commode based on the drain location. 2. Securely install the toilet flange to the floor, aligning it with the drain pipe. 3. Place the toilet over the flange, ensuring the waste outlet aligns with the drain pipe. 4. Bolt the commode to the floor using anchor bolts, tightening them without over- tightening. 5. Attach the water inlet valve to the commode's tank and connect the water supply line. 6. Apply a wax ring or sealant around the base to prevent leaks. 7. Turn on the water supply, check for leaks, and test the flush mechanism.

From Rs. 200.00

1. Check for signs like no power, unusual noises, or reduced performance. 2. Ensure the motor is disconnected from the power supply for safety. 3. Check for damaged parts, worn-out bearings, or blockages in the motor or connected system. 4. Replace damaged components like wires, capacitors, or bearings. 5. Reassemble the motor, reconnect the power, and test its functionality.

Rs. 500.00 / Hour

Tap leakage work involves detecting and fixing leaks in taps, faucets, or valves, often replacing washers or seals to prevent water wastage. Blockage work focuses on clearing obstructions in pipes, drains, or toilets, using tools like plungers or snakes to restore proper water flow and prevent backups. Both tasks require expertise to ensure long-lasting, efficient repairs.

Rs. 650.00 / Hour

1. Disconnect the existing flush tank from the toilet and water supply, remove it, and install a new one. 2. The new tank is securely mounted to the toilet bowl and connected to the water inlet. 3. The fittings, including the flush valve, handle, and pipe connections, are adjusted for proper functionality. 4. After installation, the tank is tested for leaks and proper flushing action before finalizing the work.