✅Turn off the main breaker and confirm there's no power with a voltage tester before starting. ✅Mark where the socket will go, cut an opening if needed, and securely install the back box flush with the wall. ✅Strip about 10mm of insulation from the live (brown/black), neutral (blue/white), and earth (green/yellow) wires, twisting the copper strands for secure connections. ✅Attach each wire to the correct terminal—live to "L," neutral to "N," and earth to ground. Tighten screws firmly for safety. ✅Secure the socket in the back box and attach the faceplate, ensuring everything is flush and stable. ✅Restore power and use a socket tester or device to confirm proper operation and safety. Enjoy your new installation