Rs. 500.00 / Hour

🔸 Turn off the power at the main distribution panel and verify with a voltage tester that no current is present before installation. 🔸 Choose a convenient spot for your socket and mark the exact location on the wall. 🔸 Strip 10-20 mm of insulation from the wire ends. Connect the live (brown or black), neutral (blue or white), and earth (green/yellow or bare) wires to their terminals, ensuring a secure fit by tightening the screws. 🔸 Carefully insert the socket into the back box, tucking wires neatly. Secure the socket and attach the faceplate cover for a clean finish. 🔸 Restore power and test the socket with a device or voltage tester. Confirm stability, secure connections, and ensure there are no exposed wires. If you’re unsure, consult a qualified electrician for safety and compliance.

Rs. 500.00 / Hour

✅Start by checking the installation area to find the best spots for the fixtures and ensure everything works well with the existing electrical system. ✅Gather and prepare all the lighting fixtures, wiring, switches, and mounting accessories you’ll need, following the design plans. ✅Install the light fixtures securely, run the electrical wiring, and connect the switches or dimmers, all while keeping safety and code requirements in mind. ✅After everything's set up, double-check all the connections, test each light to make sure it works properly, and ensure everything operates safely. ✅Once you’re done, tidy up the site, take care of any installation debris, and hand over a bright, fully functional lighting system to the client. Enjoy the new lights!

Rs. 500.00 / Hour

✅Evaluate the existing electrical switchboard system to identify faults and assess load requirements for necessary repairs or replacements. ✅Install new switchboards with precision, ensuring proper alignment, secure mounting, and compliance with electrical codes. ✅Repair or replace damaged components within the switchboard to restore functionality and ensure safety. ✅Remove outdated switchboards and install modern systems that meet current load demands and safety standards. ✅Conduct functional tests and insulation checks to ensure safe and efficient operation before handing over to the client.

Rs. 500.00 / Hour

✅ To identify any faults in the Miniature Circuit Breaker (MCB), such as tripping or damage. ✅Disconnect the power supply to the affected circuit for a safe working environment. ✅Remove the faulty MCB from the distribution board without damaging the wiring or busbars. ✅Install a new or repaired MCB with the correct rating for the circuit's load. ✅Reconnect the power and test the circuit to ensure proper functioning and that the new MCB trips under fault conditions.

Rs. 500.00 / Hour

✅Inspect and prepare the electrical point for installation. ✅Secure the bulb holder or tube light fixture. ✅Connect the wiring to the power source. ✅Install the bulb or tube light. ✅Test for proper operation and safety.

Rs. 500.00 / Hour

✅Identify and mark the location for the new light point as per the layout. ✅Run electrical wires through concealed or surface conduits from the switchboard to the light point. ✅Install and connect a new switch to control the light point. ✅Connect the light fixture, ensure proper earthing, and test for functionality and safety.

Rs. 500.00 / Hour

✅Review the lighting layout and mark installation points. ✅Install wiring, switches, and connections in compliance with safety standards. ✅Mount focus lights securely on walls, ceilings, or tracks. ✅Switch on the lights, check for proper operation, and adjust the beam direction. ✅Inspect for quality, ensure neatness, and clean up the work area.

Rs. 650.00 / Hour

✅Ensure the ceiling structure can support the chandelier’s weight and switch off the power supply. ✅Install the appropriate ceiling hook, bracket, or mounting plate as per chandelier type. ✅Connect electrical wiring following standard safety codes and double-check voltage compatibility. ✅Assemble chandelier parts (if required) and securely mount the fixture to the ceiling. ✅Install bulbs, test electrical connection, and adjust alignment or height as needed.