Rs. 3,840.00 / Unit

Professional gas refilling for a 1 TR (1 Ton) air conditioning unit is a specialized maintenance service designed to restore the cooling capacity of a 12,000 BTU system to its original factory efficiency. The process begins with a thorough leak detection and pressure test to identify any structural vulnerabilities in the copper piping or joints that may have caused the initial refrigerant loss. Once the system is confirmed airtight, a technician uses precision gauges to recharge the unit with the exact weight of refrigerant—typically R32 or R410A—required for a 1-ton compressor. This service not only eliminates the issue of the AC blowing warm air but also significantly reduces energy consumption by preventing the compressor from overworking. By maintaining the correct gas pressure, the service extends the overall lifespan of the hardware and ensures a consistent, comfortable indoor climate.

Rs. 5,100.00 / Unit

Professional gas refilling for a 1.5 TR AC unit is a precision service designed to restore the cooling power of 18,000 BTU systems to their optimal performance. The process includes a comprehensive leak inspection and pressure testing to ensure system integrity, followed by a precise recharge of high-quality refrigerant. By restoring the correct gas levels, this service eliminates cooling delays, reduces monthly electricity costs by improving compressor efficiency, and prevents long-term hardware wear.

Rs. 3,616.00 / Ton

AC capacitor replacement for units ranging from 1 to 5 tons is a vital repair service that restores the electrical "kickstart" necessary for your compressor and fan motor to run. Over time, heat and electrical fluctuations can wear out the capacitor, leading to issues like hard starting, humming sounds, or the AC failing to blow cold air. This service involves safely discharging the old component and installing a high-quality replacement with the correct microfarad ($µF$) and voltage rating to match your specific unit's tonnage. By replacing a failing capacitor promptly, you prevent permanent damage to the expensive compressor and ensure the cooling system starts reliably every time.

Rs. 20.00 / Unit

Changing an AC compressor for a 1-ton unit is a major technical repair that restores the heart of your cooling system. This service includes the professional removal of the faulty compressor and the precision installation of a new 12,000 BTU unit, including expert copper pipe brazing and terminal wiring. By focusing on the mechanical replacement itself, this service ensures that the system's core is structurally sound and ready for a vacuum and recharge to return the AC to its full cooling capacity

Rs. 1,808.00 / Unit

AC dismantling for units ranging from 1 to 2 tons is a professional removal service designed to safely decommission your cooling system for relocation or replacement. This process involves the critical step of pumping down and trapping the refrigerant gas within the outdoor unit to prevent environmental leakage and save on future refilling costs. Expert technicians carefully disconnect the indoor and outdoor units, secure all copper piping and electrical wiring, and remove the mounting brackets without damaging your walls. Whether you are moving to a new home or upgrading your appliance, a professional dismantle ensures that all components remain in perfect condition for reinstallation.

Rs. 3,200.00 / Unit

AC capacitor replacement is a critical repair service that restores the electrical starting power required for your air conditioner’s compressor and fan motor. The capacitor acts like a high-energy battery that provides the initial "kick" to start the cooling cycle; when it fails, the unit may hum, struggle to start, or stop blowing cold air entirely. This service involves a professional diagnosis, the safe discharge of the old electrical component, and the installation of a high-quality replacement specifically rated for your system's tonnage. Promptly replacing a weakening capacitor protects the more expensive compressor from overheating and ensures your AC starts reliably and efficiently during peak summer heat

Rs. 2,892.00 / Unit

AC dismantling for large-scale units ranging from 3 to 5 tons is a heavy-duty removal service that requires specialized handling due to the weight and complexity of the equipment. The process involves a professional refrigerant recovery or "pump-down" to secure the gas within the compressor, followed by the careful disconnection of high-capacity copper piping and heavy-gauge electrical wiring. Expert technicians ensure that the bulky indoor and outdoor units are safely unmounted and all mounting hardware is removed without compromising the building's structure. This service is essential for commercial or large residential units to ensure the system remains fully functional and protected for future relocation or replacement.

Rs. 3,616.00 / Unit

Professional AC installation for 1 to 2-ton units is a precision service that ensures your cooling system is set up for maximum performance and longevity. The process involves the strategic mounting of both indoor and outdoor units to optimize airflow, followed by the expert connection of copper piping, drainage tubes, and electrical wiring. Technicians perform a critical vacuuming of the lines to remove moisture and air before releasing the refrigerant, ensuring the system operates at peak efficiency from the very first start. This professional setup not only guarantees a clean, aesthetic finish but also prevents common issues like water leakage or gas pressure drops.

Rs. 5,152.00 / Unit

Professional installation for 3 to 5-ton AC units is a specialized service designed for high-capacity systems typically used in commercial spaces or large residences. This process involves the precision mounting of heavy-duty indoor and outdoor units, along with the expert installation of larger-gauge copper piping and robust electrical connections. Technicians perform a rigorous system vacuum and pressure test to ensure the integrity of the cooling lines before commissioning the system. By ensuring a professional setup, the service optimizes airflow and cooling distribution for large areas while maintaining the energy efficiency and structural safety required for high-tonnage equipment.

Rs. 1,988.00 / Unit

AC sensor replacement is a vital technical service that restores the climate-control accuracy of your air conditioner. The sensors are responsible for monitoring the ambient room temperature and the internal coil temperature to tell the compressor when to cycle on or off; when they fail, the AC may short-cycle, freeze up, or fail to reach the desired cooling level. This service involves a professional diagnostic check to identify the faulty thermistor, followed by the precision installation of a new, high-sensitivity sensor compatible with your specific AC brand and model. By ensuring the control board receives accurate temperature data, this repair restores consistent comfort and prevents unnecessary energy waste from an overworking compressor.

Rs. 2,800.00 / Unit

AC sensor replacement is a vital technical service that restores the climate-control accuracy of your air conditioner. These sensors are responsible for monitoring both ambient room temperature and internal coil conditions to regulate the compressor's cooling cycles; when they fail, the system may short-cycle, freeze up, or fail to reach the desired temperature. This service involves a professional diagnostic check to identify the faulty thermistor, followed by the precision installation of a new, high-sensitivity sensor compatible with your specific unit. By ensuring the control board receives accurate data, this repair restores consistent comfort and prevents energy waste from an overworking system.

Rs. 3,168.00 / Unit

Professional AC gas refilling is a precision service designed to restore the cooling efficiency of your air conditioner by replenishing the refrigerant to its optimal level. Over time, slow leaks or mechanical repairs can cause a drop in gas pressure, leading to poor cooling performance and increased energy consumption. This service involves a comprehensive system check to identify and seal any potential leak points, followed by a professional vacuuming of the lines to remove moisture and air. Our technicians then carefully charge the system with the exact weight of refrigerant—such as R32, R410A, or R22—specified by the manufacturer. Ensuring the correct gas pressure not only brings back ice-cold air but also protects the compressor from overheating and extends the overall lifespan of your unit.

Rs. 1,200.00 / Unit

Professional electrical geyser installation is a specialized service designed to ensure the safe and efficient heating of water for your home or business. The process begins with the secure mounting of the heater unit on a load-bearing wall, followed by the precision connection of inlet and outlet water pipes using high-quality safety valves to manage pressure. Expert technicians then complete the dedicated electrical wiring, ensuring proper grounding and the installation of a suitable circuit breaker to prevent overloading or short circuits. This professional setup not only guarantees a steady supply of hot water but also prioritizes user safety by preventing common risks like water leakage or electrical hazards.

Rs. 960.00 / Unit

Gemini said Professional gas geyser installation is a specialized service that ensures a safe and continuous supply of hot water using LPG or natural gas. The process involves the secure mounting of the heating unit in a well-ventilated area, followed by the precision connection of gas inlet pipes, water supply lines, and the hot water outlet. Expert technicians prioritize safety by performing rigorous leak tests on all gas joints and ensuring the pressure relief valve and exhaust systems are correctly calibrated. This professional setup not only guarantees high-efficiency heating but also protects your home from the risks of gas leaks or carbon monoxide buildup.

Rs. 800.00 / Unit

rofessional RO installation is a specialized service designed to set up your Reverse Osmosis water purification system for maximum filtration efficiency and long-term reliability. The process involves the strategic mounting of the filtration unit near a water source, followed by the precision connection of the inlet water line, the reject water drain, and the dedicated faucet. Expert technicians ensure all high-pressure seals and internal filters—including the sediment, carbon, and RO membrane—are correctly seated and flushed before the system is commissioned for use. This professional setup not only guarantees a steady supply of pure, safe drinking water but also prevents common issues like internal leaks or premature membrane clogging.

Rs. 500.00 / Unit

Professional RO servicing is a comprehensive maintenance solution designed to ensure your water purification system continues to deliver safe, high-quality drinking water. This essential service involves a deep cleaning of the internal filter housings and the replacement of pre-sediment and activated carbon filters to prevent the buildup of contaminants and odors. Expert technicians perform a critical TDS (Total Dissolved Solids) analysis to check the health of the RO membrane and inspect all high-pressure pumps and auto-cut sensors for mechanical efficiency. By performing regular professional servicing, you can prevent expensive membrane failures, eliminate potential bacterial growth, and maintain the peak performance of your filtration system.