Back to Blogs

DIY Fix for Low Water Pressure on Tap: A Simple Solution Every Homeowner Should Try

May 31, 2026
1-2 minutes

Dhara Ma Paani Ko Pressure Ekdam Kam Cha? Here’s a Simple DIY Fix!

Have you noticed that the water from your kitchen or bathroom tap is flowing much slower than usual?

Low water pressure is one of the most common household plumbing problems. Many homeowners immediately assume there’s a major issue with their plumbing system and call a plumber. However, in many cases, the solution is much simpler.

Before booking a plumbing service, try this quick DIY fix that could restore your tap’s water pressure within minutes.

What Causes Low Water Pressure in a Tap?

One of the most common reasons for low water pressure in a tap is a clogged aerator.

An aerator is the small mesh screen attached to the mouth of your tap. Its purpose is to:

  • Control water flow

  • Reduce splashing

  • Filter out debris

Over time, dirt, rust particles, mineral deposits, and sediment can build up inside the aerator, restricting water flow and reducing pressure.

🛠️ DIY Fix: Clean the Tap Aerator

Follow these simple steps to fix low water pressure at home.

Step 1: Remove the Aerator

Carefully unscrew the aerator from the end of the tap using your hand.

If it’s too tight, use a grip-lock plier or adjustable wrench to loosen it gently.

👉 Be careful not to damage the threads.

Step 2: Inspect for Dirt and Debris

Once removed, check the mesh screen inside.

You may find:

  • Dirt buildup

  • Rust particles

  • Mineral deposits

  • Sand and sediment

These blockages are often the main cause of reduced water flow.

Step 3: Clean the Aerator

Use:

  • A small brush

  • An old toothbrush

  • Running water

Clean all the accumulated debris thoroughly.

For stubborn mineral deposits, soak the aerator in vinegar for 30 minutes before cleaning.

Step 4: Reinstall the Aerator

After cleaning, attach the aerator back to the tap and tighten it properly.

Make sure it is securely fitted but not over-tightened.

Step 5: Test the Water Flow

Now open the tap and check the water pressure.

In many cases, you’ll notice an immediate improvement in water flow.

✅ Problem solved without calling a plumber.

When Cleaning the Aerator Doesn’t Work

If the pressure is still low after cleaning the aerator, the issue may be caused by:

1. Hidden Pipe Blockage

Dirt, rust, or sediment inside the plumbing line can restrict water flow.

2. Water Tank Issues

A low water level or blocked tank outlet may reduce pressure.

3. Faulty Plumbing Fixtures

Old or damaged taps may affect water flow.

4. Pipe Leakage

Leaks can reduce pressure throughout the plumbing system.

5. Pressure Regulator Problems

Some homes use pressure regulators that may malfunction over time.

In these situations, professional inspection may be required.

How to Prevent Low Water Pressure

To keep your taps working properly:

✔ Clean aerators every 3–6 months

✔ Schedule regular plumbing maintenance

✔ Inspect water tanks periodically

✔ Fix leaks immediately

✔ Replace old plumbing fixtures when necessary

Regular maintenance helps avoid costly plumbing repairs later.

🔧 Need Professional Plumbing Help?

If you’ve tried this DIY fix and your water pressure is still low, it may be time for expert assistance.

Sajilo Sewa provides professional:

  • Plumbing repair services

  • Water leakage solutions

  • Tap and faucet replacement

  • Water tank maintenance

  • Pipe inspection and repair

Our verified plumbers can diagnose and solve water pressure issues quickly and efficiently.

📱 Book a Plumber Through the Sajilo App

With the Sajilo App, you can:

  • 📅 Choose your preferred date and time

  • 🎁 Apply available promo codes

  • 🪙 Earn and redeem loyalty points

  • ⭐ View technician ratings and reviews

  • 🛡️ Enjoy a 30-day service warranty

Getting professional plumbing support is now simple and hassle-free.

❓ FAQ Section

Why is my tap water pressure suddenly low?

The most common reason is a clogged aerator, but pipe blockages, leaks, or water tank issues can also cause low pressure.

Can I clean a tap aerator myself?

Yes. Cleaning a tap aerator is a simple DIY task that requires minimal tools and only a few minutes.

How often should I clean my tap aerator?

It’s recommended to clean it every 3–6 months, especially in areas with hard water or sediment buildup.

What if cleaning the aerator doesn’t improve water pressure?

You may have a plumbing issue such as a pipe blockage, leak, or faulty fixture that requires professional inspection.

Does Sajilo Sewa provide plumbing services in Kathmandu?

Yes. Sajilo Sewa offers professional plumbing services across Kathmandu Valley, including tap repair, leakage solutions, and water pressure troubleshooting.

WhatsApp9801888282